Self Aligning Roller Bearing
Part number : 23140-K-C3-CA-W33
Description
The Self Aligning Roller Bearing, known as 23140-K-C3-CA-W33 Generic, has an inner diameter of 200 mm, an outer diameter of 340 mm and a thickness of 112 mm.
What is a self aligning bearing?
You can find all the information you need about our products in our expert's advice, by clicking here Here
8 to 10 days
Need help or advice?
(646).712.9672
Description
The Self Aligning Roller Bearing, known as 23140-K-C3-CA-W33 Generic, has an inner diameter of 200 mm, an outer diameter of 340 mm and a thickness of 112 mm.
What is a self aligning bearing?
You can find all the information you need about our products in our expert's advice, by clicking here Here
Need help or advice?
(646).712.9672
Brand | GEN |
---|---|
Inside diameter | 200 mm |
Outside diameter | 340 mm |
Thickness | 112 mm |
Limiting speed | 950 rpm |
Dynamic load | 1 380 000 kN |
Static load | 2 360 000 kN |
Packaging | 1 |
The Self Aligning Roller Bearing, known as 23140-K-C3-CA-W33 Generic, has an inner diameter of 200 mm, an outer diameter of 340 mm and a thickness of 112 mm.
What is a self aligning bearing?
A spherical bearing, or swinging bearing is a bearing that is able to accept that the spindle is slightly out of alignment. These bearings are regularly located in grinders or agricultural machines, regularly placed in cast iron SN bearings, with a shim washer and seals specific to these bearings. Attention, there are 2 important variants: • The cylindrical bore bearing, which will be mounted directly on the shaft, in force
• The tapered bore bearing, mounted with a sleeve, on an axis smaller than the bore of basis of turnover. The tapered bore is indicated by the letter K in the reference.What does the letter K mean in the reference?
The letter K means that the bearing has a tapered bore. It should therefore almost always be mounted with a conical sleeve. Attention, this bearing is generally mounted on an axis of 5mm less than the dimension indicated for the bearing.