Self Aligning Ball Bearing

1212-KOYO

Inside diameter 60
Outside diameter 110
Thickness 22

Part number : 1212-JTEKT

JTEKT

Description

The Self Aligning Ball Bearing, known as 1212-KOYO JTEKT, has an inner diameter of 60 mm, an outer diameter of 110 mm and a thickness of 22 mm.

See data sheet

What is a self aligning bearing?

You can find all the information you need about our products in our expert's advice, by clicking here Here

N/A

  8 to 10 days

product_sheet product_sheet product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment
picto_need_help

Need help or advice?

(646).712.9672

Description

The Self Aligning Ball Bearing, known as 1212-KOYO JTEKT, has an inner diameter of 60 mm, an outer diameter of 110 mm and a thickness of 22 mm.

See data sheet

What is a self aligning bearing?

You can find all the information you need about our products in our expert's advice, by clicking here Here

product_sheet product_sheet product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment
picto_need_help

Need help or advice?

(646).712.9672

TECHNICAL DATA

Brand JTEKT
N° EAN13 4549250087479
Inside diameter 60 mm
Outside diameter 110 mm
Thickness 22 mm
Limiting speed 5 200 rpm
Dynamic load 30,20 kN
Static load 11,60 kN
Packaging 1

PRODUCT DESCRIPTION

The Self Aligning Ball Bearing, known as 1212-KOYO JTEKT, has an inner diameter of 60 mm, an outer diameter of 110 mm and a thickness of 22 mm.

EXPERT ADVICE

What is a self aligning bearing?

A spherical bearing, or swinging bearing is a bearing that is able to accept that the spindle is slightly out of alignment. These bearings are regularly located in grinders or agricultural machines, regularly placed in cast iron SN bearings, with a shim washer and seals specific to these bearings. Attention, there are 2 important variants: • The cylindrical bore bearing, which will be mounted directly on the shaft, in force
• The tapered bore bearing, mounted with a sleeve, on an axis smaller than the bore of basis of turnover.
The tapered bore is indicated by the letter K in the reference.

What does the letter K mean in the reference?

The letter K means that the bearing has a tapered bore. It should therefore almost always be mounted with a conical sleeve. Attention, this bearing is generally mounted on an axis of 5mm less than the dimension indicated for the bearing.

CUSTOMER REVIEWS