Self Aligning Ball Bearing

1309-TN-ZEN

Inside diameter 45
Outside diameter 100
Thickness 25

Part number : 1309-TN-ZEN

ZEN

Description

The Self Aligning Ball Bearing, known as 1309-TN-ZEN ZEN, has an inner diameter of 45 mm, an outer diameter of 100 mm and a thickness of 25 mm.

See data sheet

What is a self aligning bearing?

You can find all the information you need about our products in our expert's advice, by clicking here Here

Your price: $19.79

  8 to 10 days

product_sheet product_sheet product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment
picto_need_help

Need help or advice?

(646).712.9672

Description

The Self Aligning Ball Bearing, known as 1309-TN-ZEN ZEN, has an inner diameter of 45 mm, an outer diameter of 100 mm and a thickness of 25 mm.

See data sheet

What is a self aligning bearing?

You can find all the information you need about our products in our expert's advice, by clicking here Here

product_sheet product_sheet product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment
picto_need_help

Need help or advice?

(646).712.9672

CUSTOMERS ALSO BOUGHT

TECHNICAL DATA

Brand ZEN
Inside diameter 45 mm
Outside diameter 100 mm
Thickness 25 mm
Weight 944 g
Packaging 1

PRODUCT DESCRIPTION

The Self Aligning Ball Bearing, known as 1309-TN-ZEN ZEN, has an inner diameter of 45 mm, an outer diameter of 100 mm and a thickness of 25 mm.

EXPERT ADVICE

What is a self aligning bearing?

A spherical bearing, or swinging bearing is a bearing that is able to accept that the spindle is slightly out of alignment. These bearings are regularly located in grinders or agricultural machines, regularly placed in cast iron SN bearings, with a shim washer and seals specific to these bearings. Attention, there are 2 important variants: • The cylindrical bore bearing, which will be mounted directly on the shaft, in force
• The tapered bore bearing, mounted with a sleeve, on an axis smaller than the bore of basis of turnover.
The tapered bore is indicated by the letter K in the reference.

What does the letter K mean in the reference?

The letter K means that the bearing has a tapered bore. It should therefore almost always be mounted with a conical sleeve. Attention, this bearing is generally mounted on an axis of 5mm less than the dimension indicated for the bearing.

CUSTOMER REVIEWS