LOG IN CART BUSINESS SOLUTIONS
SELF ALIGNING BALL BEARING

Part number 1211-K-TVH-C3-H211-FAG

50 Inside diameter 50 100 Outside diameter 100 21 Thickness 21
1211-K-TVH-C3-H211-FAG
1211-K-TVH-C3-H211-FAG
1211-K-TVH-C3-H211-FAG
1211-K-TVH-C3-H211-FAG
FAG
1211-K-TVH-C3-H211-FAG
1211-K-TVH-C3-H211-FAG
1211-K-TVH-C3-H211-FAG
1211-K-TVH-C3-H211-FAG
Compare product
CE PRODUIT N'EST PLUS DISPONIBLE VOIR LES AUTRES "SELF ALIGNING BALL BEARING"

Need help or advice?

(646).712.9672

Description

The Self Aligning Ball Bearing, known as 1211-K-TVH-C3-H211-FAG FAG, has an inner diameter of 50 mm, an outer diameter of 100 mm and a thickness of 21 mm.

Need help or advice?

(646).712.9672

CUSTOMERS ALSO BOUGHT
Tapered roller bearing - 32015-JR-JTEKT JTEKT

TAPERED ROLLER BEARING 32015-JR-JTEKT

75 Inside diameter 75 115 Outside diameter 115 25 Thickness 25

$44.91

  29 parts in stock (5 days ago )
Rotary shaft seal - OA-100X120X10-NBR GEN

ROTARY SHAFT SEAL OA-100X120X10-NBR

100 Inside diameter 100 120 Outside diameter 120 10 Thickness 10

$10.57

  23 parts in stock (6 days ago )
TECHNICAL DATA
  • BRAND
    FAG
  • N° EAN13
    3663952346229
  • INSIDE DIAMETER
    50  MM
  • OUTSIDE DIAMETER
    100  MM
  • THICKNESS
    21  MM
  • WEIGHT
    966  G
  • PACKAGING
    1
Compatibilities
Description

The Self Aligning Ball Bearing, known as 1211-K-TVH-C3-H211-FAG FAG, has an inner diameter of 50 mm, an outer diameter of 100 mm and a thickness of 21 mm.

EXPERT ADVICE 


What is a self aligning bearing?


 A spherical bearing, or swinging bearing is a bearing that is able to accept that the spindle is slightly out of alignment.   These bearings are regularly located in grinders or agricultural machines, regularly placed in "cast iron SN" bearings, with a shim washer and seals specific to these bearings.   Attention, there are 2 important variants:   • The cylindrical bore bearing, which will be mounted directly on the shaft, in force 
• The tapered bore bearing, mounted with a sleeve, on an axis smaller than the bore of basis of turnover.   The tapered bore is indicated by the letter "K" in the reference. 


What does the letter "K" mean in the reference?


 The letter K means that the bearing has a tapered bore. It should therefore almost always be mounted with a conical sleeve. Attention, this bearing is generally mounted on an axis of 5mm less than the dimension indicated for the bearing.